ARB pressure switch 100psi.
This pressure switch turns your compressor off at 100psi in a tank or system and turns the compressor back on when the pressure drops to 70psi.
This pressure switch is sourced through ARB to ensure you will not have problems with ARB air lockers and warranties. It is the same unit the comes with your ARB diff lock.
Simply screw it into your air system/tank (3/8 NPT thread) and wire it up by intercepting the power to the on/off switch for the compressor. For best results the compressor should be wired through a solenoid / relay so that the pressure switch and on/off switch use low current and the pump itself has big heavy wires for big current and a big heavy earth.
We also sell higher capacity pressure switches as follows (but not suited to air lockers unless regulated down). Higher pressure means faster pumping of tyres and more impressive air tool operation.
70/100 ARB switch $25
110/135 BOSS switch $27.50
110/150 BOSS switch $27.50
150/180 BOSS switch $27.50
Also available ... Check Valve for preventing air flowing back through the compressor when not running .. $30
